Airsoft HPA

Kuulutusi: 27 Hinnang: 1 2 3 4 5 0.0

Esita päring

Sinu nimi:

Sinu e-post:

   

Sinu küsimus:

Märkus: HTML kood ei ole lubatud!

Sisestage pildil nähtav kontrollkood:

SA-J03 EDGE 2.0™ Carbine Replica

The EDGE 2.0 ™ series introduces a completely new quality to the Specna Arms replica family, adding new functionalities and innovations to the tried and tested design. As a result, Specna Arms EDGE 2.0 ™ carbines offer an exceptional high level of craftsmanship and technical advancement straight out of the box. 

Replica Features:

- receiver made out of steel sheet
- steel, one-piece outer barrel
- metal hop-up chamber
- Helium™ Flat Hop bucking
- precise aluminum inner barrel with a diameter of 6.03mm
- ESA2™ quick spring change system - after folding the stock and removing the cover, we have access to the spring guide without the need to dismantle the gearbox shell
- additional M90 main spring included
- pre-installed GATE ASTER™ V3 system
- reinforced ORION™ V3 Gearbox, ensuring high quality operation.

The mechanism is prepared for further tuning and ready to work with M140 springs. Inside the replica there are such elements as: 

• reinforced polymer piston with a full steel jaw
• aluminum, double sealed cylinder head
• aluminum double sealed piston head with ball bearing
• spring guide with ball bearings
• set of steel gears

- muzzle device on 24mm CW / 14mm CCW thread
- side mounting rail of the "dovetail" type
- realistic structure in the VFC system, based on pins, levers and pins
- a lot of space for a stick type battery under the dust cover (LiPo ready)
- side-folding skeletal stock
- magwell spacer insert for easy magazine reloading
- originally designed mid-cap S-MAG magazines with a capacity of 130 BBs.

Package include:

• 2 x mid-cap S-MAG magazine
• QC certificate
• Deans adapter - small Tamyia
• GATE ASTER diagnostic card
• Instrukcja
• Replica
• M90 additional spring